ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

BISSELL model guide

BISSELL Rewind CleanView Pet 58F8 / 18M9 / 84G9 / 26T5

Rewind CleanView Pet 58F8 / 18M9 / 84G9 / 26T5: bagless upright vacuum with automatic cord rewind. Repair assessment covers brush drive, airflow, cord, and switch.Rewind CleanView Pet 58F8 / 18M9 / 84G9 / 26T5: bagless upright vacuum with automatic cord rewind.

Status
Discontinued
Type
Corded bagless rewind upright vacuum family
Characteristics
automatic cord rewind · lever-latched round-filter cup · rear hose and extension wand
Repair finder

Model issues and repair guidance

The round filter cup must be latched and sealed before an airflow test. Compare suction at the rear hose with floor pickup: loss at both paths moves to the cup, filters, hose, and inlet, while good hose suction moves to the lower hose, brush housing, roll, and belt. These older heads keep the brush active whenever the motor runs, so avoid stationary tool use on delicate flooring. Untwist and extend the lead before assigning a cord-reel repair or a no-power fault.Latch and seal the round filter cup, then compare rear-hose and floor suction. Loss at both paths moves to cup, filters, hose, and inlet; good hose flow moves to lower hose, roll, and belt. The brush runs with the motor, and cord twists should be cleared before reel work.

Possible causes

Possible repair paths for your Rewind CleanView Pet 58F8 / 18M9 / 84G9 / 26T5

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repair
Cord ReelCord reels are convenient but can fail mechanically or electrically.View repairHose RepairA hose problem can look like weak suction even when the motor is fine.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairSeal or GasketVacuums rely on sealed airflow.View repair
Cord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repairPower Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 12

BISSELL Rewind CleanView Pet 58F8 / 18M9 / 84G9 / 26T5

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for BISSELL Rewind CleanView Pet 58F8 / 18M9 / 84G9 / 26T5
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now