ConnecticutVacuumRepair
Annual Vacuum Tune-Up

Keep your vacuum working well with a professional tune-up.

Routine care removes buildup, checks airflow, and helps catch developing wear before it becomes an expensive breakdown.

What we do during a tune-up
  • Cleaning and exterior wipe-down
  • Airflow check
  • Basic adjustments for your vacuum
(860) 255-4956Call Now

BISSELL model guide

BISSELL Pet Hair Eraser DualBrush 42946

Pet Hair Eraser DualBrush 42946: bagless upright vacuum with a detachable Lift-Off pod. Inspection covers brush drive, airflow, cord, and switch.Pet Hair Eraser DualBrush 42946: bagless upright vacuum with a detachable Lift-Off pod.

Status
Active
Type
Corded bagless lift-off upright vacuum
Characteristics
two counter-rotating brush rolls · detachable cleaning pod · headlights and 7-foot hose
Repair finder

Model issues and repair guidance

Start a stopped or uneven pair of rollers by reclining the handle and trying a normal floor; BISSELL notes that textured, foam, or plastic surfaces can make their speed fluctuate without reducing cleaning performance. If either roll still binds, remove both, clear the foot, spin the end caps, and inspect the shared belt. For weak pickup, test the suction port before separating the dirt tank, filters, hose connections, and lower passage from a motor fault.Recline the handle and retest both rollers on a normal floor, since unusual surfaces can alter their speed. If they still bind, clear the foot and inspect both rolls and belt; for weak pickup, test the suction port before the tank, filters, hose, or motor.

Possible causes

Possible repair paths for your Pet Hair Eraser DualBrush 42946

Clog RemovalClogs can hide in the hose, wand, floor head, filters, bin, bag chamber, or internal air path.View repairFilter ServiceFilters protect the motor and indoor air, but they can also choke airflow when they are packed with fine dust.View repairBrush Roll RepairBrush-roll repair addresses the removable roller, its bearings, end caps, bristles, and seating.View repairBelt ReplacementVacuum belts wear, stretch, snap, slip, and burn when the brush roll is jammed or the vacuum is working too hard.View repair
Hose RepairA hose problem can look like weak suction even when the motor is fine.View repairBag or BinThe bag, bin, or dust cup is part of the airflow system.View repairSeal or GasketVacuums rely on sealed airflow.View repairCord or PlugA damaged cord or plug can make a vacuum unsafe and unreliable.View repair
Power Switch or TriggerPower-switch repair addresses the physical trigger, button, actuator, terminals, and nearby wiring that command the vacuum to start.View repairMotor RepairMotor repair checks bearings, carbon brushes, windings, wiring, and the motor assembly after simpler causes are ruled out.View repairFan or BlowerThe fan or blower wheel creates airflow.View repair
1–4 of 11

BISSELL Pet Hair Eraser DualBrush 42946

What is your vacuum doing?

Choose every symptom you notice, then select Check.

Symptoms for BISSELL Pet Hair Eraser DualBrush 42946
0 selected Your final repair may be different after inspection.

Start your vacuum repair

Just tell us what's wrong and schedule a time for us to come fix it.

Start Repair(860) 255-4956Call Now